|
PUBLISHED ARTICLES AND PAPERS
2008
The mind method for analysis of resource efficiency in industrial systems for materials production
Christer Ryman, Magnus Karlsson, Carl Erik Grip
2nd Int. Seminar on Society & Materials, SAM2, 24-25 April, Nantes, France.
Steel velocity measurements in a stirred ladle
Johan Björkvall, Ulf Sjöström, Jonas Alexis
AISTech 2008, 5-8 May, Pittsburgh, US.
Ladle age effects on stirring intensity during ladle refining
Jonas Alexis
AISTech 2008, 5-8 May, Pittsburgh, US.
A new sensor concept for roll-gap measurements in cold flat rolling
Jonas Lagergren, Nils-Göran Jonsson, M Arentoft, T Wanheim
AISTech 2008, May 5-8, Pittsburgh, US.
The use of microwave technology in the steel and metal industry, an overview
Donald Malmberg
SCANMET III, 8-11 June, Luleå.
Utilizing of electric energy consumption in melting of stainless steel in an EAF using the concept of foaming slag
Johan Björkvall, Johan Eriksson, Lasse Liljedahl
SCANMET III, 8-11 June, Luleå.
Monitoring of raceway variations during blast furnace operation
Pär Hahlin, Donald Malmberg
SCANMET III, 8-11 June, Luleå.
Slag line refractory
Johan Eriksson, V Brabie, I Kasimagwa, H Wahlberg
SCANMET III, 8-11 June, Luleå.
A novel process for simultaneous scrap preheating and surface rinsing
Mikael Larsson, Sten Ångström
SCANMET III, 8-11 June, Luleå.
Oxygen blast furnace process for Swedish conditions
Linda Bergman, Mikael Larsson, Jan-Olov Wikström,
Lena Sundqvist Ökvist
SCANMET III, 8-11 June, Luleå.
Combustion and slag forming effects by co-injection of BOF slag with PC into the BF
Lena Sundqvist Ökvist, Guangqing Zuo, Nicklas Eklund
SCANMET III, 8-11 June, Luleå.
Optimisation of sustainability in integrated steelmaking
Christer Ryman, Liisa Vikström, Mikael Larsson, Staffan Rutqvist
PRES 2008 - 11th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, 24-28 August, Prague, Czech Republic.
Olivine as slag conditioner in ironmaking, and its effect on processing characteristics and CO2 emission
Lena Sundqvist Ökvist, Steinar Slagnes
3rd International Meeting on Ironmaking, 22-26 September, Sao Luiz, Brasil.
HSC Simulations of coal based DR in ULCORED
Linda Bergman, Mikael Larsson
4th Ulcos seminar, 1-2 October, Essen, Germany.
The use of gases in metallurgical processes – Applications and requirements
Lena Sundqvist Ökvist
International seminar on Gasification, 9-10 October, Malmö.
Preheating and surface cleaning of steel scrap by ASR
Mikael Larsson, Sten Ångström, Eric Burström, Guozhu Ye
REWAS 2008, 12-15 October, Cancun, Mexico.
Recovery of zinc from EAF dust – pilot experiences at MEFOS
Guozhu Ye
REWAS 2008, 12-15 October, Cancun, Mexico.
Computational fluid dynamics as a tool in developing new processes for the base metal industry
Johan Sjöström, Magnus Lundqvist
Computational Modelling in Minerals Processing 08, 13-14 November, Cape Town, South Africa.
Heat transfer during iron ore pellet induration – An experimental study and simulations
Ulf Sjöström, Magnus Lundqvist, Daniel Marjavaara
Computational Modelling in Minerals Processing 08, 13-14 November, Cape Town, South Africa.
Evaluation of eco-efficiency in iron- and steelmaking by use of a process integration tool
Christer Ryman, Marianne Östman, Bo Lindblom
Eighth International Conference on EcoBalance, 9-12 December, Tokyo.
A model on CO2 emission reduction in integrated steelmaking by optimization methods
Chuan Wang, Mikael Larsson, Christer Ryman, Carl-Erik Grip,
J-O Wikström, Andreas Johnsson, Jonas Engdahl
International Journal of Energy Research, 2008; 32, pp. 1092-1106.
Practical experiences of roll pass design for rolling of rails and the application of FE-methods in the groove design process
Jan-Olov Perä, Roberto Villanueva
Der Kalibreur, Heft 69 (2008), pp. 75-78.
Effect of different PCI practice on the texture obtained during reduction of iron oxide pellets
Ulrika Leimalm, Lena Sundqvist Ökvist, Bo Björkman
ISIJ Int. Vol 48 (2008), No. 12, pp. 1686-1695.
2007
PRISMA - Centre for process integration in steelmaking; Ett kunskapscentrum för processintegration vid ståltillverkning
Christer Ryman
Sveriges Energiting, 20-21 March, Stockholm, Sweden
Numerical simulation of coal combustion in the raceway under different injection conditions
Dong Yuan Sheng, Per Hellberg, Jan-Olov Wikström
AISTech 2007, 7-10 May, Indianapolis, USA
Model based evaluation of sustainability indicators in integrated steelmaking: A Swedish case study
Christer Ryman, Carl-Erik Grip, Mikael Larsson
AISTech 2007, 7-10 May, Indianapolis, USA
Kombinerad förvärmning och ytrening av skrot
Mikael Larsson, Sten Ångström
Stål 2007, 9-10 May, Borlänge, Sweden
NOx-RF – Low NOx combustion
John Niska, Anders Rensgard, Magnus Mörtberg
Stål 2007, 9-10 May, Borlänge, Sweden
En experimentell metod att fastställa materialdata för valskraftsmodeller
Jan Levén, Olof Wiklund
Stål 2007, 9-10 May, Borlänge, Sweden
Effektiv porförslutning vid valsning av långa produkter
Håkan Lundbäck
Stål 2007, 9-10 May, Borlänge, Sweden
Measuring and controlling ski-ends in plate rolling
Annika Nilsson, Agne Bogdanoff
Stål 2007, 9-10 May, Borlänge, Sweden
Friction and roll pressure measurements in cold rolling
Nils-Göran Jonsson, Jonas Lagergren, Mogens Arentoft, Poul
Henningsen, Tarras Wanheim, Jari Nylander, Jesper Ederth
Stål 2007, 9-10 May, Borlänge, Sweden
Användning av FEM vid spårkalibrering och sprickanalys
Jan-Olov Perä
Stål 2007, 9-10 May, Borlänge, Sweden
Svensk LD-slagg – En levande vanadingruva i världsklass
Guozhu Ye, Kim Kärsrud
Stål 2007, 9-10 May, Borlänge, Sweden
Fysikaliskt baserad konstitutiv modellering vid varmbearbetning
Mats Karlberg
Stål 2007, 9-10 May, Borlänge, Sweden
Development of advanced and innovative pyrometallurgical processes by pilot testing
Guozhu Ye, Nils-Olov Lindfors, Eric Burström
International Conference on Advances in Metallurgical Processes and Materials (AdMet), 27-30 May, Dnipropetrovsk, Ukraine
Study on steel/slag interaction in a gas-stirring ladle by numerical simulation and physical modelling experiment
Dong Yuan Sheng
Clean Steel 7, 4-6 June, Balatonfüred, Hungary
Ideas for standardized sampling routines – Some thoughts about the necessity of developing adequate routines for durable sampling procedures
Thorbjörn Hansén, Gunilla Runnsjö, Hans Hägglund, Pär Jönsson
Clean Steel 7, 4-6 June, Balatonfüred, Hungary
A model study on CO2 emission reduction in integrated steelmaking by optimisation methods
Chuan Wang, Mikael Larsson, Christer Ryman, Carl-Erik Grip, Jan-Olov Wikström
3rd International Green Energy Conference (IGEC III), 18-20 June, Västerås, Sweden
Adaptation of process integration models for minimisation of energy use, CO2 emissions and raw material costs for integrated steelmaking
Christer Ryman, Mikael Larsson
10th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES07) , 24-27 June, Ischia Island, Italy
Pyrometallurgical systems for recycling and thermal treatment of industrial and municipal wastes
Guozhu Ye, Eric Burström, Sten Ångström
R’07 World Congress, Recovery of Materials and Energy for Resource Efficiency, 3-5 September, Davos, Switzerland
Learning from nature: The Tornado process
Janne Tikka, Nils-Olov Lindfors, Erik Bäcklund
5th International Heavy Minerals Conference (HMC 2007), 9-14 September, Hluhluwe, South Africa
Practical experiences of roll pass design for rolling of rails and the application of FE methods in the groove design process
Jan-Olov Perä, Roberto Villanueva
77th AIKW Conference, 3-5 October, Örebro, Sweden
Pilot furnace trials with low NOx with air and oxyfuel combustion
Anders Rensgard, Donald Malmberg, John Niska
American-Japanese Flame Research Committees International Symposium, 21-24 October, Waikoloa, Hawaii
Modelling of the transient cooling of coiled hot strip products by influence of the contact pressure
Mats Karlberg
International Conference on Physical and Numerical Simulation (ICPNS’ 2007), 23-27 October, Zhengzhou, China
Applied CFD for process control in the metallurgical industry
Jonas Alexis, Johan Björkvall, Mselly Nzotta
16th Steelmaking Conference, 6-8 November, Rosario, Argentina
Study on the formation of open-eye and slag entrainment in gas stirred ladle
Johan Björkvall
Steel Research International 78 (2007), No. 12, pp. 849-856
Microwave technology in steel and metal industry, an overview
Donald Malmberg, Pär Hahlin
ISIJ International, vol 47 (2007), No. 4, pp 533-538
Concentrating of vanadium oxide to vanadium rich phases by addition of SiO2 in converter slag
Liang Yu, Yuan-chi Dong, Guozhu Ye, Du Sichen
Ironmaking and Steelmaking, vol 2, 2007
2006
Investigating the use of roll speed difference for the control of ski-ends in plate rolling
A Bogdanoff, Suvi Niemi, Annika Nilsson
Steel Rolling, 19-21 June 2006, Paris, France.
Minimization of energy consumption and conversion cost for BF-BOF system based on optimised use of ferrous burden materials
Christer Ryman, Chuan Wang, Mikael Larsson, Jan Dahl, Carl-Erik Grip
5th European Oxygen Steelmaking Conference, 26-28 June 2006, Aachen, Germany.
Process integration as a tool for energy saving, pollution reduction and strategic technology evaluation in the steel industry
Mikael Larsson, Christer Ryman, Jan-Olov Wikström
9th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, 27-31 August 2006, Prague, Czech Republic.
Elimination of zinc ferrite for hydrometallurgical recovery of zinc from EAF dust
Guozhu Ye, Eric Burström, Massimo Maccagni, Loris Bianco, Håkan Stripple
2006 TMS Fall Extraction and Processing Meeting: Sohn International Symposium on Advanced Processing of Metals and Materials: Principles, Technologies, and Industrial Practice, 27-31 August 2006, San Diego, USA.
Oxy-combustion – A viable solution for reduced emissions and minimized energy consumption
John Niska, Anders Rensgard, M Mörtberg, R Tsiava,
H-P Gitzinger, R Giese
2006 AFRC International Symposium, 16-18 October 2006, Houston, USA.
Raceway depth measurements in the blast furnace using microwave technology
Pär Hahlin, Donald Malmberg
4th International Congress on Science and Technology of Ironmaking, 26-29 November 2006, Osaka, Japan.
Application of computational fluid dynamics modelling on the grate-kiln process at LKAB
Ulf Sjöström, Magnus Lundqvist, Ola Eriksson
Fifth International Conference on CFD in the Process Industries, CSIRO, 13-15 December 2006, Melbourne, Australia.
Process integration as a tool for strategic technology evaluation in metallurgical industry
Mikael Larsson, Christer Ryman, J-O Wikström
Conference of Metallurgists (COM2006), 1-4 October 2006, Montreal, Canada.
Microwave technology in steel and metal industry, An overview
Donald Malmberg
International Symposium on the Microwave Processing in Iron- and Steelmaking and Environmental Protection – Fundamentals and Application,
6-7 March 2006, Tokyo, Japan.
Application of FE methods in practical groove roll design of structurals
Jan-Olov Perä, Roberto Villanueva
9th International & 4th European Steel Rolling Conference, 19-21 June 2006, Paris, France.
The concept of the liquid sampling and hot rolling method for determination of macro inclusion characteristics in steel
Thorbjörn Hansén, Pär Jönsson, S-E Lundberg, Ketil Törresvoll
Steel Research International, No. 3, March 2006, pp. 177-185.
The use of the LSHR sampler to determine total oxygen contents in the ladle and tundish for different steel grades
Gunilla Runnsjö, Pär Jönsson, Thorbjörn Hansén
Steel Research International, No. 8, 2006.
A new approach for the study of slag-metal interface in steelmaking
Kristina Beskow, Pranesh Dayal, Johan Björkvall, Du Sichen
Ironmaking and Steelmaking, 2006, vol. 33, No. 1, pp. 74-80.
Study of slag/metal interface in ladle treatment
Pranesh Dayal, Kristina Beskow, Johan Björkvall, Du Sichen
Ironmaking and Steelmaking, 2006, vol. 33, No. 6, pp. 454-464.
Reduction of CO2 emissions from integrated steel-making by optimised scrap strategies: Application of process integration models on the BF-BOF system
Christer Ryman, Mikael Larsson
ISIJ International, vol. 46 (2006), No. 12, pp. 1752-1758.
Transfer of surface texture from silicon nitride rolls to stainless steel wire in cold-rolling
Peter Andersson, Michael Wild, Jan Levén, Björn Hemming
Journal of Materials Processing Technology, vol. 173 (2006), pp. 394-400.
A new transducer for local load measurements of friction and roll pressure in cold flat rolling
J Lagergren, T Wanheim, W Precz, P Henningsen, M Arentoft,
N-G Jonsson
Steel Research International, No. 6, June, 2006.
Friction is necessary – A new transducer design approach to measure the friction stress and the normal roll pressure in the roll gap during cold flat rolling
J Lagergren, T Wanheim, M Arentoft, P Henningsen, N-G Jonsson, J Nylander, J Ederth
Jernkontorets Annaler – Nordic Steel & Mining Review, No. 3, vol. 190, 2006.
2005
Cold model study of the phenomena involved in slag-metal mixing during ladle treatment
Pranesh Dayal, Du Sichen
AISTech, Charlotte, N.C., USA, 9-12 May 2005.
Effect of temperature on coke properties and CO2 reactivity under laboratory conditions and in an experimental blast furnace
Tobias Hilding, Jan-Olov Wikström et al
AISTech, Charlotte, N.C., USA, 9-12 May 2005.
A model of gas injection into a blast furnace
tuyere
Per Hellberg, TLI Jonsson, Pär Jönsson, Dong Yuan Sheng
Fourth International Conference on CFD in the Oil and Gas, Metallurgical & Process Industries, SINTEF/NTNU, Trondheim, Norge, 6-8 June 2005.
Investigation of coke properties while descending through an experimental blast furnace
Tobias Hilding, Jan-Olov Wikström, Urban Janhsen, Olavi Kerkkonen
The 5th European Coke- and Ironmaking Congress (ECIC 2005), 12-15 June 2005, Stockholm, Sverige.
Overview of coke- and ironmaking in the Nordic countries
Jan-Olov Wikström
The 5th European Coke- and Ironmaking Congress (ECIC 2005), 12-15 June 2005, Stockholm, Sverige.
Similarities between pinch analysis and classical blast furnace analysis methods. Possible improvement by synthesis
Christer Ryman, Carl-Erik Grip, Per-Åke Franck, Jan-Olov Wikström
The International Green Energy Conference, 12-16 June 2005, Waterloo, Ontario, Canada.
Sensor for non-contact velocity measurement for continuous casting slab moulds - First results from industrial measurement
Ulf Sjöström, Håkan Kelvesjö
ECCC 2005, 5th European Continuous Casting Conference, 20-22 June, 2005, Nice, France.
The role of pilot plants in development of sustainable processes for the metal industry
Eric Burström
The Floyd Symposium, 3-6 June 2005, Melbourne, Australia.
A realistic kinetic description of slag-metal reactions in ladle treatment - towards the optimisation of ladle refining
Pranesh Dayal, Kristina Beskow, Johan Björkvall, Mselly Nzotta, Du Sichen
The 7th Nordic-Japan Symposium "Science and technology of process metallurgy", 15-16 September 2005, Stockholm, Sverige.
Experience with process integration in the steel industry: applied studies regarding energy and environmental efficiency for the SSAB Tunnplåt AB steel mill
Mikael Larsson, Carl-Erik Grip
The 7th Nordic-Japan Symposium "Science and technology of process metallurgy", 15-16 September 2005, Stockholm, Sverige.
Using microwave technology to create a topographical image of the burden surface in a blast furnace
Emil Nilsson, Donald Malmberg
The 15th IAS Steelmakning Conference & 2nd IAS Ironmaking Conference, 8-11 November, 2005, Argentina.
Process control of reheating furnaces - state of the art and new developments
Bernhard Dahm, Bo Leden, Dirk F. J. Staalman
The International annual meeting Stahl 2005, 10-11 November 2005, Düsseldorf, Germany.
Preliminary microwave measurements on liquid slags
Donald Malmberg, Johan Björkvall, Johan Malm, Lars Bååth
Ironmaking and Steelmaking, Vol 32, No 1, 2005, p. 61.
A mathematical model of a blast furnace injection tuyere
P. Hellberg, T.L.I. Jonsson, P.G. Jönsson
Steel Research International 76(2005) No. 11, page 755-763.
2004
MgO modification of slag from stainless steelmaking
(MEF03058) Johan Eriksson
Presented at The 7th International Conference on Molten Slags Fluxes & Salts (MSFS7), Cape Town, South Africa, 25-28 January 2004
Experimental model study for separation and dissolution of liquid inclusions at the interface between steel and slag
(MEF03086) Marianne Magnelöv
Presented at The 7th International Conference on Molten Slags Fluxes & Salts (MSFS7), Cape Town, South Africa, 25-28 January 2004
Preliminary microwave measurements on liquid slags
(MEF03089) Donald Malmberg, Johan Björkvall, Johan Malm, Lars Bååth
Presented at The 7th International Conference on Molten Slags Fluxes & Salts (MSFS7), Cape Town, South Africa, 25-28 January 2004
Reduction of chromium oxide containing slags using CaC2 injection
(MEF03090) Johan Björkvall, Sten Ångström, Lars Kallin
Presented at The 7th International Conference on Molten Slags Fluxes & Salts (MSFS7), Cape Town, South Africa, 25-28 January 2004
Metallurgical characteristics of the MEFOS 3 MW DC arc furnace
(MEF03018) Guozhu Ye, Jonas Alexis, Eric Burström
Presented at INFACON X, Cape Town, The Republic of South Africa,
1-4 February 2004
Uniform deformation in open die forging by optimized pass schedules and bite-shift
(MEF04004) Håkan Lundbäck
Presented at ESAFORM2004, 29 april 2004, Trondheim, Norge
Prediktion av mekaniska egenskaper
(MEF04015) Mats Karlberg
Presenterad vid STÅL 2004, 5-7 maj 2004, Borlänge, Sverige
Förbättrad smörjning vid kallvalsning
(MEF04016) Andreas Johnsson
Presenterad vid STÅL 2004, 5-7 maj 2004, Borlänge, Sverige
Förbättrad kallvalsning a slittade band
(MEF04017) Thorbjörn Hansén
Presenterad vid STÅL 2004, 5-7 maj 2004, Borlänge, Sverige
Förbättrade dimensionstoleranser och kalibrering vid stångvalsning
(MEF04018) Jan-Olov Perä
Presenterad vid STÅL 2004, 5-7 maj 2004, Borlänge, Sverige
Statistisk behandling av driftsdata från svenska LB-verk för förbättrad styrning
(MEF04022) Erik Sandberg
Presenterad vid STÅL 2004, 5-7 maj 2004, Borlänge, Sverige
Automatisering av LD-processen - dagens och framtida utmaningar
(MEF04023) Tommi Niemi
Presenterad vid STÅL 2004, 5-7 maj 2004, Borlänge, Sverige
Ökad gjuthastighet, möjligheter och begränsningar
(MEF04024) Ulf Sjöström
Presenterad vid STÅL 2004, 5-7 maj 2004, Borlänge, Sverige
Cold rolling tests of lubricants
(MEF04003)Andreas Johnsson
Presented at the 2nd International Conference on Tribology in Manufacturing Processes, ICTMP2004, 16-18 maj, 12004, Nyby, Danmark
CFD database and its application in process metallurgy
(MEF04012) Liping Gu, Jonas Alexis, Jan-Olov Wikström
Presented at SCANMET II, 2nd International Conference on Process Development in Iron and Steelmaking, 6-9 June 2004, Luleå, Sweden
REZIN – New ways to recover zinc from EAF dust
(MEF04014) Guozhu Ye, Eric Burström, Massimo Maccagni, Loris Bianco, Håkan Stripple
Presented at SCANMET II, 2nd International Conference on Process Development in Iron and Steelmaking, 6-9 June 2004, Luleå, Sweden
Multivariate prediction of end conditions for electric arc furnace
(MEF04021) Erik Sandberg, Barry Lennox, Patrik Undvall
Presented at SCANMET II, 2nd International Conference on Process Development in Iron and Steelmaking, 6-9 June 2004, Luleå, Sweden
Development of a sensor for non-contact velocity measurements for continuous casting slab moulds
(MEF04025) Ulf Sjöström, Håkan Klevesjöl
Presented at SCANMET II, 2nd International Conference on Process Development in Iron and Steelmaking, 6-9 June 2004, Luleå, Sweden
Simulation of AL-addition in an inductive stirred ladle
(MEF04039) Eva Johansson, Jonas Alexis, Branka Vidacak
Presented at SCANMET II, 2nd International Conference on Process Development in Iron and Steelmaking, 6-9 June 2004, Luleå, Sweden
Investigation of slag systems with microwave technology
(MEF04040) Johan Eriksson, Johan Björkvall, Donald Malmberg
Presented at SCANMET II, 2nd International Conference on Process Development in Iron and Steelmaking, 6-9 June 2004, Luleå, Sweden
Development of a reducing gas injection technology at blast furnace 5 and 6 of VoestAlpine Stahl GmbH
(MEF04041) Thomas Buergler, Guenther Brunnbauer, Alfred Ferstl, Per Hellberg, Bror-Erik Skoeld, Kurt Wieder, Johann Wurm, Robert Millner
Presented at SCANMET II, 2nd International Conference on Process Development in Iron and Steelmaking, 6-9 June 2004, Luleå, Sweden
On the assessment of macro inclusions in stainless steels using ultrasonic technique
(MEF04064), Thorbjörn Hansén, Gunilla Runnsjö, Ketil Törresvoll, Pär Jönsson
Presented at the 16th World Conference on Nondestructive Testing, Montreal, Canada, August 30 - September 3, 2004
Ways to reduce CO2-emissions at SSAB Luleå Works
(MEF04059) Jan-Olov Wikström, Carl Erik Grip, Mikael Larsson, Sten Ångström
Presented at The 2nd International Conference & Exhibition on New Developments in Metallurgical Process Technology, 19-21 September 2004, Riva del Garda, Italy
Modelling of the blast furnace process with a view to optimise the steel plant energy system
(MEF04089 ) Christer Ryman, Mikael Larsson, Tommi Niemi, Carl-Erik Grip
Presented at The 2nd International Conference & Exhibition on New Developments in Metallurgical Process Technology, 19-21 September 2004, Riva del Garda, Italy
Measuring and calculating flatness during hot-coiling
(MEF04044), Annika Nilsson, Juha Jokisaari, Åke Stenström
Presented at The 10th International Conference MetalForming 2004, Akademia Górniczo-Hutnicza, 19-22 September 2004, Krakow, Polen
A study on the ski-end direction in plate mills
(MEF04045), Annika Nilsson, Suvi Niemi, Agne Bogdanoff
Presented at The 10th International Conference MetalForming 2004, Akademia Górniczo-Hutnicza, 19-22 September 2004, Krakow, Polen
Phase relations in the system of ZnO-Fe2O3-CaO and its importance for elimination of zinc ferrite in EAF dust
(MEF04013) Guozhu Ye, Eric Burström
Presented at REWAS’04 September 26-29, 2004, Madrid, Spain
Improved dimensional tolerances in rod and bar rolling and practical use of FE methods for groove design in shape rolling
(MEF04067) Jan-Olov Perä
Presented at the “15th IAS Rolling Conference”, 2-5 November 2004,
San Nicolas, Argentina
Industrial Trials Using A Tunable Diode Laser to Measure Furnace Gas Temperatures and Oxygen Concentrations
(MEF04098) Donald Malmberg, John Niska and Anders Rensgard
Presented at Environmental control of combustion processes: Innovative technology for the 21st century, Maui, Hawaii, 10-13 October 2004
Cold rolling tests of lubricants
(MEF04075) Andreas Johnsson
Presented at International ATS Steelmaking Conference, 9-10 december, Paris, Frankrike.
Verklig friktion och verkligt valstryck vid kallvalsning
Jonas Lagergren, Nils-Göran Jonsson, Tarras Wanheim, Poul Henningsen, Mogens Arentoft
Bergsmannen nr 6 2004, s 30-
|
